Kansas Geological Survey, Open-file Report 2007-5
Brett R. Engard, Carl D. McElwee, Rick Devlin, Brian Wachter, and Benjamin Ramaker
Department of Geology
The University of Kansas
KGS Open File Report 2007-5 Annual Report
Strategic Environmental Research and Development Program
Project # ER1367
VIEWS, OPINIONS, AND/OR FINDNGS CONTAINED IN THIS REPORT ARE THOSE OF THE AUTHORS AND SHOULD NOT BE CONSTRUED AS AN OFFICIAL DEPARTMENT OF THE ARMY POSITION, OR DECISION UNLESS SO DESIGNATED BY OTHER OFFICIAL DOCUMENTATION
A considerable body of research has shown that the major control on the transport and fate of a pollutant as it moves through an aquifer is the spatial distribution of hydraulic conductivity. Although chemical and microbial processes clearly play important roles, their influence cannot fully be understood without a detailed knowledge of the subsurface variations in hydraulic conductivity at a site. A number of theories have been developed to quantify, in a generic sense, the influence of these variations using stochastic processes or fractal representations. It is becoming increasingly apparent, however, that site-specific features of the hydraulic conductivity distribution (such as high conductivity zones) need to be quantified in order to reliably predict contaminant movement. Conventional hydraulic field techniques only provide information of a highly averaged nature or information restricted to the immediate vicinity of the test well. Therefore, development of new innovative methods to delineate the detailed hydraulic conductivity distribution at a given site should be a very high priority. The research proposed here is directed at addressing this problem by developing techniques with the ability to map 3-D hydraulic conductivity distributions.
Since spatial changes in hydraulic conductivity are a major factor governing the transport and fate of a pollutant as it moves through an aquifer, we have focused on the development of new innovative methods to delineate these spatial changes. The objective of the research proposed here is to build on our previous research to develop and improve field techniques for better definition of the three-dimensional spatial distribution of hydraulic conductivity by using hydraulic tomography coupled with high-resolution slug testing.
We have been working for a number of years to quantify hydraulic conductivity fields in heterogeneous aquifers. One method we have worked on extensively that shows great promise is high-resolution slug testing. This method allows the delineation of the vertical distribution of hydraulic conductivity near an observation well. We propose to combine this method with another innovative method for investigating the hydraulic conductivity distribution between wells, called hydraulic tomography. We will use an oscillating signal and measure its phase and amplitude through space in order to estimate the hydraulic conductivity distribution of the material through which it has traveled. Our preliminary work has shown that the phase and amplitude of the received signal can be measured over reasonable distances. The high-resolution slug testing results will be used as an initial condition and will provide conditioning for the tomographic inverse procedure, to help with any non-uniqueness problems. Slug test data are most accurate near the tested well and should probably not be extrapolated blindly between wells. Together, slug testing and hydraulic tomography should be more powerful than either one used in isolation and should give the best opportunity to characterize the hydraulic conductivity in-situ by a direct measure of water flow, as an alternative to indirect methods using geophysical techniques.
Read the PDF version (1 MB)
Kansas Geological Survey, Geohydrology
Placed online March 2, 2007
Comments to email@example.com
The URL for this page is http://www.kgs.ku.edu/Hydro/Publications/2007/OFR07_5/index.html