EAVESDROPPER Demonstration Disk                          April 1993
Instructions

This file is also contained on the demo disk as README.DMO.

This diskette contains a compressed file of approximately 720K. When
this file is uncompressed it takes 2.3MB of space.  Because of other
files that are created during the demonstration process, we recommend
that you have at least 3.5MB free on your hard disk before you
proceed with this demonstration of EAVESDROPPER.

FIRST
Create a new directory on your hard disk to hold the demo (the
directory should be COMPLETELY empty) and log to that directory. It
is not important what you call this directory.  We do not recommend
running the demo at the root level of DOS.

SECOND
Copy DEMO.EXE from this disk to your newly-created directory.  At the
DOS prompt type DEMO to execute a batch file that will uncompress the
demo file.

THIRD
To start the demonstration, type the name of the appropriate batch
file from the list below.  There are six batch files that can be run
depending on your hardware and your desired demonstration.

DEMOCGA  - CGA monitor and IBM graphics printer
DEMOCGA1

DEMOEGA  - EGA or VGA monitor and IBM graphics printer
DEMOEGA1

DEMOHP   - EGA or VGA monitor and HP printer
DEMOHP1

As you can see, there are two versions of each demo.  DEMOHP shows
only the results of fk processing while DEMOHP1 actually runs the fk
filter, which takes some time.  It is the same for the CGA and EGA
versions of the demo.

FOURTH
To terminate the demonstration, type CONTROL-C (press and hold the
CONTROL key, then press C) at any time you are not running graphics
or plotting routines.



EAVESDROPPER
Kansas Geological Survey
1930 Constant Avenue
Lawrence, Kansas  66047-3726
Phone (913) 864-3965 / Fax (913) 864-5317