HELP: Cross Section Plot

The plot applet opens the LAS files and plots the data on one plot using the cross section control XML file to determine the order of the Well/Location and the order of the plot tracks of each well/location. If the Elevation is present then the data is displayed with respect to the elevation or to a horizon.

Select a button from the following list to view Help pages.
Open a Cross Section
		Open a Cross Section Plot.
Cross Section Plot Control
		Cross Section Control Dialog Description
		Change Depth Scale of Cross Section Plot.
		Change Depth Range of Cross Section Plot.
Direct Data Entry to Profile Plot on Cross Section
		Formation Tops (Stratigraphic Units) Data Entry Dialog
Datum Wells/Locations By ...
		Elevation	Each of the Wells are computed at a common depth with respect to the Elevation. This can only be done if the Elevation is present for each well.
		Horizon	Each of the Wells are computed at a common depth with respect to the Horizon (Formation Top), i.e. this example, B-P/LM Bed. This can only be done if the Horizon exists in all the wells, since the depth is referenced at each log depth for each well.
		Log Depth	Each of the Wells are computed at a common depth with respect to Log Depth, since all logs are computed from the surface as 0 ft. This datum does not require that a wells elevation exist.

Author: John R. Victorine jvictor@kgs.ku.edu