Tertiary Oil Recovery Project Advisory Board Meeting Click here to start Table of Contents Tertiary Oil Recovery Project Advisory Board Meeting CO2 Project Field Activities Potential CO2 Flood Pattern CO2 1 Well Work CO2 1 Well Work Photograph:Echometer gun used for the 1st build-up test on CO2 1 Photograph:Echometer equipment CO2 1 Well Work X-pert Service Tools’ PPI Tool (Pin Point Injection) being RIH prior to CO2 1 acid job Oilman’s Acid, Inc. on location for CO2 1 acid job CO2 1 Well Work Comparison of Build-up Tests Echometer setup Colliver 7 Well Work Colliver #7 – Well configuration as of 1989 Colliver #7 – Current Well Configuration (2001) Colliver #7 – Current Well Configuration (2001) Showing Lansing Stratigraphy Colliver 7 Well Work The Rosel Company on location to run Colliver 7 tracer survey Rosel Company technician fills survey tool with tracer material Colliver 7 Well Work Colliver 7 Well Work Injection line ran from Colliver 10 to Colliver 7 Inline filters installed at Colliver 7 Planned Colliver 10 Well Work Colliver A-10W – Before Workover Colliver A-10W – After Workover Colliver A-10W – After Workover Depicting the Lansing Stratigraphy Preliminary CO2 Facilities Design River City Engineering’s preliminary production facilities design for CO2 Project Preliminary CO2 Facilities Design Preliminary CO2 Facilities Design Preliminary CO2 Facilities Design Preliminary CO2 Facilities Design Arbuckle Efforts Arbuckle DST Shut-in Pressures Bemis-Shutts Field, Ellis County, KS Arbuckle annular gas collected by Precision Wireline Miniature gun-barrel used to collect Arbuckle oil sample Miniature gun-barrel Production Equipment Setup Ethanol Plant Construction Ethanol Plant Construction, Russell, KS Ethanol Plant Construction, Russell, KS Download presentation source